PRODUCT
- 400-085-9099
- bentonite@zjhuate.com
- www.zjhuate.com
- Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park
Rheology agent for waterborne system HT-600
HT-600 is a polyamide based rheology additives for waterborne system. HT-600 forms a network structure with paint components in a coating system, prevents sagging and pigment settling. Different from
Description
HT-600 is a polyamide based rheology additives for waterborne system. HT-600 forms a network structure with paint components in a coating system, prevents sagging and pigment settling. Different from traditional waterborne thickening agents, HT-600 has strong pseudoplasiticy.
Typical Physical Data
Advantages
Ø☆Outstanding thixotropy, anti-sagging and anti-settling properties.
Ø☆It is easy to disperse and can be dispersed in a high-speed disperser without grinding.
Ø☆Contributes to an improved orientation of aluminum powder in the waterborne metallic paint.
Ø☆Good water resistance.
Applications
HT-600 can be used in a wide range of waterborne coating systems.
Incorporation
1. Use HT-600 and water in a ratio of (1:4) to make a pre-gel. Post-addition by a dissolver is recommended.
2. Dispersing temperature is recommended between room temperature and 40℃. The Dispersing speed is 1500-2000 RPM, and the time is 15-20 min.
3. HT-600 will have better performance if the system pH value is greater than 8.
4. Additive level is 1.0-3.0 weight% as product on total formulation.
Storage
1. Keep from freezing. Freezing causes degradation of quality and performance.
2. Do not heat. Store below 40℃. Heating causes degradation of quality and performance.
HT-600 is a polyamide based rheology additives for waterborne system. HT-600 forms a network structure with paint components in a coating system, prevents sagging and pigment settling. Different from traditional waterborne thickening agents, HT-600 has strong pseudoplasiticy.
Typical Physical Data
| Appearance | Yellow paste |
| Active matter | 20％ |
| Amine | N,N-dimethylethanolamine |
| Solvent | Water/ Propylene glycol monomethyl ether |
| Acid Value | 12.5 |
Advantages
Ø☆Outstanding thixotropy, anti-sagging and anti-settling properties.
Ø☆It is easy to disperse and can be dispersed in a high-speed disperser without grinding.
Ø☆Contributes to an improved orientation of aluminum powder in the waterborne metallic paint.
Ø☆Good water resistance.
Applications
HT-600 can be used in a wide range of waterborne coating systems.
Incorporation
1. Use HT-600 and water in a ratio of (1:4) to make a pre-gel. Post-addition by a dissolver is recommended.
2. Dispersing temperature is recommended between room temperature and 40℃. The Dispersing speed is 1500-2000 RPM, and the time is 15-20 min.
3. HT-600 will have better performance if the system pH value is greater than 8.
4. Additive level is 1.0-3.0 weight% as product on total formulation.
Storage
1. Keep from freezing. Freezing causes degradation of quality and performance.
2. Do not heat. Store below 40℃. Heating causes degradation of quality and performance.
