PRODUCT
  • 400-085-9099
  • bentonite@zjhuate.com
  • www.zjhuate.com
  • Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park

Smectite Adsorbent BP-BCW

  The raw material of the product is natural nano smectite. Through natural drying and grinding, the material finally turns into this product. Its a green, natural smectite adsorbent material without ad
1. Brief Introduction:
 
The raw material of the product is natural nano smectite. Through natural drying and grinding, the material finally turns into this product. Its a green, natural smectite adsorbent material without additive. The content of smectite is large, therefore, the product provides large absorption capacity and excellent absorption capacity.
 
2. Typical Properties:
 
Appearance Creamy-white or grayish white Fine powder
Moisture @105℃ ≤10%
Density(g/cm3) 2.2
Fineness through 325 mesh ≥90%
Bulk Density(kg/cm3) ≤600
Smectite Content(dry basis) ≥95%
Pb (ppm) 30
As (ppm) ≤5
Cd (ppm) ≤0.75
 
3. Typical Applications:
 
Feed Additive: The principal constituent of this product is smectite which belongs to natural mineral feed category. It can be added directly into feed additive,with the function of moisture absorption and anti agglomeration, as a result, the forming rate of the pellet feed can be greatly improved. This product can also be used as binder for pellet feed and has a significant absorption for aflatoxin in the feed. It can greatly alleviate the harm of aflatoxin to the growth and reproduction of the animals, relieve the harm of fungal toxin in the feed, especially the aflatoxin, to animal bodies, enhance animal immunity.  
 
 
 
Catalyst Carrier: The smectite in this product has the characteristics of high adsorption capacity, high cation exchange capacity, high surface layer charge density, stable chemical structure and chemical property etc. It has a high adsorption capacity for catalyzer and can enhance catalytic effect by stabilizing the catalyzer within smectite layers. This product has a neutral PH value, which wont influence catalyst activity.      
 
4. Usage Methods :
 
Used as feed additive.
 
1. Adsorbent for aflatoxin, the recommended level is 0.5-3kg/ton.
 
2. Adsorbent for moisture and anticaking, the recommended level is 1-3% of the total system.
 
3. Binder, the recommended level is 2-4% of the total system.
 
5.  Package and storage:
 
The material of outer package for BP-BCW is kraft paper bag, while the inner double layer package of polyethylene film bag or paper bag is used for inner package. The weight is usually 25 + 0.25kg in accordance with the requirements of users. It should be stored in a dry condition. The product quality will be valid for 24months with the temperature range 0℃~30℃.