PRODUCT
  • 400-085-9099
  • bentonite@zjhuate.com
  • www.zjhuate.com
  • Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park

Rheology Modifier BP-183-B

  BP-183-B is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.
1.    Advantages:
BP-183-B is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.
Ø  High gelling efficiency over low to medium polarity organic liquids,
especially in aromatic compounds.
Ø  Ideal thixotropy property and anti-sediment property.
Ø  High viscosity and excellent thickening property over a wide temperature range.
Ø  Imparts particle suspension, preventing hard settling of pigment and fillers.
Ø  Exerts strong film reinforce action in organic binder systems.

2.    Typical Properties:
Color Appearance Density Moisture
(@105,2hrs)
Fineness through 200 mesh Loss on Ignition
( @1000 )
Light Yellow Free Flowing Powder 1.7g/cm3 3.5% ≥98% ≤40%
 

3.    Typical Applications:
Acrylic paint Road paint
Alkyd paint Inks(mineral oil)
Anti-corrosion paint Inks(Nitro)
Baking paint Adhesive
Bituminous paint Putties and sealant
Chlorinated rubber paint Lubricating grease
Polyester paint Cosmetics
Primer paint Waster water treatment

4.    Incorporations:
BP-183-B belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical
(polar) activator to reach the proper level of delamination of the organoclay platelet stacks.


Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 40%-60% by weight of BP-183B.

It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.

5.    Recommended Levels:
The amount of BP-183-B rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are
typically between 0.2%-2.0% based on the total
formulation weight.

6.    International Countertype: Bentone®34Claytone®40

7.    Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg  according to customer demands.