PRODUCT
- 400-085-9099
- bentonite@zjhuate.com
- www.zjhuate.com
- Zhejiang province Anji County high Yu Zhejiang Tianzi Lake modern industrial park
Rheology Modifier BP-183-K
BP-183-K belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay.
1. Advantages:
BP-183-K is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.
☆High gelling efficiency over low to medium polarity organic liquids.
☆ Easy of incorporation. No need for polar activator or making pregel.
☆ Consistent in rheology and thixotropy development.
☆ Excellent sag resistance and high viscosity.
☆ Easy of dispersion.
2. Typical Properties:
3. Typical Applications:
4. Incorporations:
BP-183-K belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, BP-183-K does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
5. Recommended Levels:
The amount of BP-183-K Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.
6. International Countertypes: Bentone®SD-3, Claytone®AF
7. Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands
BP-183-K is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.
☆High gelling efficiency over low to medium polarity organic liquids.
☆ Easy of incorporation. No need for polar activator or making pregel.
☆ Consistent in rheology and thixotropy development.
☆ Excellent sag resistance and high viscosity.
☆ Easy of dispersion.
2. Typical Properties:
| Color | Appearance | Density |
Moisture (@105℃,2hrs) |
Fineness through 200 mesh |
Loss on Ignition ( @1000℃ ) |
| Light Yellow | Free Flowing Powder | 1.7g/cm3 | ≤3.5% | ≥98% | ≤40% |
3. Typical Applications:
| ●Acrylic paint | ●Road paint |
| ●Alkyd paint | ●Silica paint |
| ●Anti-corrosion paint | ●Solvent epoxy paint |
| ●Bituminous paint | ●Nitro lacquer |
| ●Chlorinated rubber paint | ●Inks(Mineral oil) |
| ●Marine paint | ●Inks(Nitro) |
| ●Non-solvent epoxy paint | ●Lubricating grease |
| ●Polyester paint | ●Adhesive |
| ●Primer paint |
4. Incorporations:
BP-183-K belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, BP-183-K does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
5. Recommended Levels:
The amount of BP-183-K Rheology Modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.
6. International Countertypes: Bentone®SD-3, Claytone®AF
7. Packaging and Storage:
Brown paper packages plus internal polyethylene film bags,or paper packages with valve mouths are used.The weight of each package is generally 25±0.25 kg according to customer demands
